{"id":13489,"date":"2019-03-19T22:00:57","date_gmt":"2019-03-20T02:00:57","guid":{"rendered":"http:\/\/www.gad.net\/Blog\/?p=13489"},"modified":"2023-07-29T01:52:46","modified_gmt":"2023-07-29T05:52:46","slug":"1985-guild-brian-may-bhm1","status":"publish","type":"post","link":"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/","title":{"rendered":"1985 Guild Brian May BHM1"},"content":{"rendered":"

\"\"<\/a>Over the years a few companies have built copies of Brian May’s famous Red Special guitar, and while they are pretty easy to come by today, that was not the case in the ’80s. One of the first to make one was Guild who, in the mid-1980s, produced a small number of these BHM1 guitars.<\/p>\n

I’ve managed to procure one of these interesting pieces of Brian May and Guild history, so join along while I give it the detailed review treatment right down to the magnets in the pickups.<\/p>\n

<\/p>\n

Introduction<\/h2>\n

\"\"<\/a>Today, there are many copies of Brian May’s iconic Red Special guitar, but back in the mid-1980s there were almost none.\u00a0While some copies had been made, it was a very big deal when Brian May made a deal with Guild to make what was advertised as a faithful reproduction of the guitar built and made famous by Brian May of Queen<\/em>.\u00a0The problem was that it wasn’t all that faithful a reproduction and it came with a pretty steep price, the combination of which made sales unlikely for the average musician.<\/p>\n

\"\"<\/a>2020 Update<\/strong> – My guitar (the one in this review) is now included in the book,\u00a0Brian May’s Red Special: The Story of the Home-Made Guitar that Rocked Queen and the World<\/span><\/em>! Simon Bradley who wrote the book with Brian May contacted me because apparently Brian does not own one, so I took pictures for him, one of which appears on page 155 of the second edition<\/a>! \u00a0<\/span>You should absolutely go buy a copy because there is no more thorough writeup of Brian May’s original Red Special than that book.\u00a0<\/span><\/p>\n

I am, as the British say, dead chuffed.<\/p>\n

And now back to our regularly scheduled review.<\/p>\n

\"\"<\/a>Anyone who knew anything about Queen and the Red Special knew that Brian May didn’t use a Kahler and even if they didn’t, they probably knew that the guitar didn’t look just right. Brian May used a vibrato\u00a0that was\u00a0hand-made with his dad back in the mid ’60s, so right away that wasn’t right. Also the pickups were advertised as custom-made exact duplicates of the old Burns TriSonics accurately reproduced\u00a0by Dimarzio <\/em>but they didn’t look anything like the originals, instead opting for a black covering with Brian May’s signature on them. If the guitar played and sounded right, then the cosmetics could get a pass, right? That’s not really how signature guitars work, but this was the ’80s so we’ll still give it a fair shake.<\/p>\n

Some things were accurate. The Guild guitar is chambered, has the proper headstock angle, has a zero fret, and includes a bunch of other features that they did get right, so it’s not like the guitar is a terrible instrument, but it’s not quite right for\u00a0the purist.<\/p>\n

\"\"<\/a>According to the often incorrect Guild serial number chart, the ’80s Brian May BHM1 was made from 1984-1986 and indeed the guitar is no longer listed in the 1987 price list.<\/p>\n

The 1986 catalog, from which this picture was taken, lists the guitar as having the option of a mahogany or flamed maple top, which guitar in the catalog and the one in this review both have. The mahogany topped versions look similar but the grain is, of course, much finer and not visible from a distance.<\/p>\n

The pedal<\/a> shown in the catalog is often said to have come with the guitar, but I’ve never seen one for sale including the pedal. The pedal is also listed in the price guides as a $100 item, so I don’t know if perhaps some dealers just packaged them together or if there was something else going on. I can tell you that in 2018 the pedal was almost as difficult to find as the guitar, but I have one that I reviewed here<\/a>.<\/p>\n

\"\"<\/a>There was a fair bit of marketing surrounding this guitar and considering that Live Aid<\/a> happened in 1985, having Brian May of Queen being a celebrity endorsor couldn’t have hurt. Surprisingly, at least from a Brian May fan perspective, there didn’t seem to be many sales of this guitar, though I’d say the price and differences from the original no doubt put some people off, a double-edged curse that remains to this day. Sure, you can usually find one of these guitars for sale, but I’ve seen them listed for some ridiculous money that even a lunatic collector like me wouldn’t pay.<\/p>\n

If the serial number charts are to be believed (and they shouldn’t), then there were only about 350 of these guitars made. Ron Thorn, Principle Master Builder at the Fender Custom shop, owner of Thorn Custom Guitars<\/a>, and well-known collector of Guild Brian May guitars has written<\/a> that he’s never seen one with a serial number below 100 and therefore thinks that there may be only 216 of them. I cannot validate either\u00a0number, but even if you consider those\u00a0numbers to be low by half that’s still not a lot of guitars for what amounts to the only production copy (at the time) of one of the world’s most famous guitars.<\/p>\n

\"\"<\/a>Even Dimarzio, who wound the pickups for the 1980s Guild BHM1, got into the act with magazine ads popping up that clearly had pics from the same photo shoot even if Brian did throw a jacket on to shake things up. If you look closely at both ads you can see that even\u00a0the Kahler bar is in the same position. At least he’s smiling in the Guild ad. I guess pickups are a more serious business.<\/p>\n

I think my favorite part of the Dimarzio ad is the bottom where it says, “Brian May can be heard on numerous Queen LPs.” You\u00a0know you’ve made a lot of records when they stop listing your latest one and just say, “look, there’s a lot of albums so just go ahead and pick one because there’s not a loser in the bunch.” Dimarzio sold those pickups individually as well and I sometimes see them listed online for similarly ridiculous prices. As you’ll see, I went and bought one which I examine below.<\/p>\n

\"\"<\/a>There was even a contest run by Guild and Guitar for the Practicing Musician<\/em> magazine where a Guild BHM1 was given away along with a pile of strings and one of Brian May’s solo albums. I wonder who won that guitar? If it was you please leave a comment!<\/p>\n

By the way, if you’d like to see some pretty cool custom or one-off Guild Brian May guitars from the 1980s, it’s worth checking out Abalone Vintage’s page<\/a> to that effect including this killer black one<\/a>\u00a0and this knock-out sunburst<\/a> example. And if those don’t wow you, how about this seafoam green example<\/a> from this page<\/a><\/p>\n

Back to the history of this cool guitar, as much as people these days complain that the 1980s Brian May BHM1 isn’t good enough, it was clearly good enough for Brian May who proceeded to use it in the 1985 One Vision<\/a> video. He’s even wearing a very<\/em> ’80s Guild neon logo tank top in some of the scenes! That logo was used on many electric guitars from that era such as this one<\/a> from the Setzer Bluesbird<\/a>.<\/p>\n

\"\"<\/a>The cynic in me wonders if the guitar was actually used in the recording because in a couple of quick pans you can see what I have to assume is the original Red Special in the background. It’s hard to tell sound-wise because that video is filled with some very ’80s processed sound so anything is possible. It’s a fun song, but I wouldn’t put it up against some of Queen’s classics.\u00a0Then again I’m sitting here judging a Queen video as a guy who’s sitting in front of a computer having never recorded an album, let alone been a part of Queen. Look, the guitar’s in the video, OK? Let’s move on.<\/p>\n

\"\"<\/a>In the 1985 price list this guitar was the second highest priced electric guitar at $1200 topped only by the Blade Runner X100 ($1499) and barely out-pricing the Nightbird at $1195.<\/p>\n

The 1986 catalog includes the detailed description shown here, and notes a bunch of marketing hyperbole about it being an absolute unique guitar, though I think there’s a little bit of wordplay there since they’re describing Brian’s Red Special while shifting back and forth to the Guild.<\/p>\n

Though this catalog doesn’t list color options, the pics I linked to earlier clearly indicate that if colors other than red weren’t standard, then they certainly were available as a custom option because there are a fair number of spectacular looking non-standard examples of this guitar out there and I have to admit that I kind of want to own them all.<\/p>\n

\"\"<\/a>There’s a\u00a0cool Brian May article<\/a> in this copy of the May\/June 2017 issue of Guitar Tricks Insider<\/a>\u00a0which has this great picture of Brian May with an ’80s Guild BHM1. The article is worth checking out directly from Their Site<\/a>\u00a0because there are videos embedded in it that are worth watching. I have to say that I kind of dig the idea of a magazine with videos in it, though they’re not quite as cool as a Harry Potter newspapers if you have to use electronics to view them.<\/p>\n

The case<\/h2>\n

\"\"<\/a>The case that this guitar came in was pretty typical of the Guild cases for nice guitars in the mid-80s.\u00a0Unfortunately, due\u00a0to a seller not packing the instrument well, the case incurred some damage as the box must have been dropped hard on its end. The good news is that the case did its job and the guitar is unmarked. I guess it’s a good thing this wasn’t an acoustic because I’ve seen end-pins push into the bottoms of acoustics. I guess Brian’s original design stands up to engineering muster given this rather extreme stress test.<\/p>\n

Finish<\/h2>\n

\"\"<\/a>This being a 1980s Guild, the finish is likely still lacquer, and like most of the\u00a0other Guild electrics I’ve seen, the finish is impeccable. There are no missed spots, no bubbling, and not so much as a lacquer check some 36 years after this guitar was made. Honestly, I think this guitar sat in its case for most of its life which is probably a good thing for a collector piece like this, especially given the prices they can command when in original condition.<\/p>\n

Fretboard and Neck<\/h2>\n

\"\"<\/a>If you’ve read anything about the original Red Special, then you may know that it has a neck that people comment on when they get to hold it, because it’s apparently huge. The neck on this Guild copy is nice and wide at 1 7\/8″, but it’s not deep like the original. That actually disappointed me because I’m a fan of big ‘ol baseball bat neck Les Pauls. Guild describes the neck as wide yet comfortable <\/em>which is marketing speak for we changed it<\/em>.<\/p>\n

My guess is that a super-huge neck would have been a tough sell in the midst of the shredder-crazed ’80s, but then this guitar didn’t sell well in the end, anyway, so I guess the change didn’t pay off.<\/p>\n

\"\"<\/a><\/p>\n

This is a 24″ scale instrument which is supposedly part of the magic since most Gibson and Guild electrics are 24.75″ and most Fenders are 25.5″, so 24″ is an odd size.\u00a0The fretboard is unbound ebony which is nice and I might argue an upgrade from the original which has an oak fretboard that had been coated with Rustin’s black plastic coating to make it look like ebony because they couldn’t afford the real thing at the time. The carve is right around 9.5″ which is similar to the original.<\/p>\n

The inlays on the original were buttons from his mom’s (mum’s<\/em> in the Queen’s English) sewing kit, but I’m going to go ahead and assume these are typical pearloid dots. The inlay pattern which is fairly unique matches the original guitar.<\/p>\n

\"\"<\/a>The frets measure .085″ inches wide by .04″ high which make them medium or regular sized frets.\u00a0They are finished well, though over the years there is the tiniest bit of sprout on the ends which I’ve read is\u00a0unfortunately common on these rare guitars. The frets are tall enough\u00a0that I can grip a chord out of tune\u00a0which is odd to me because that doesn’t really happen with my other vintage Guilds with similar frets.<\/p>\n

One of the changes from the original is the addition of the locking nut which is part of what you get when you add a Kahler. Brian’s Red Special now has Schaller locking tuners on it, but it has never had a locking nut. This guitar has a zero fret just like the original.<\/p>\n

\"\"<\/a><\/p>\n

Another important design aspect of the original that is matched in this guitar is the headstock angle which is very slight at only 10 degrees. This makes the strings a fair bit slinkier than on other guitars with more severe angles, though I’d venture a guess that that’s tempered a bit with the addition of the locking nut. It definitely adds to the overall look of the guitar, though, especially given the shape of the headstock.<\/p>\n

Build Quality<\/h2>\n

\"\"<\/a>This is a very well made instrument with a typically superb neck joint.\u00a0There is binding on the front and back of the body which matches the design of the original, though the neck heal is different. Then again so is the neck joint as evidenced by the fact that you can see the truss rod bolt through the back of Brian’s original.\u00a0The body binding is a very nice 5-layer affair that looks even better close-up than it does from a distance where the detail can get lost.\u00a0This guitar weighs 7lbs 2oz which is a pretty good weight considering its size, and that brings us to\u00a0the topic of chambering.<\/p>\n

\"\"<\/a>I find one of the most common online<\/p>\n

complaints about this guitar to be\u00a0that it’s not chambered like the original even though it says in the catalog that, Its interior construction includes an acoustic chamber<\/em>. I should also point out that the very same catalog then describes the body as solid mahogany, so without a bandsaw or an x-ray machine I can’t say for sure.<\/p>\n

Further fuel for the “it’s not chambered” fire\u00a0may source from the Wikipedia article on Brian May<\/a> where it says,\u00a0In 1984 Guild released the first official Red Special replica for mass production, and made some prototypes specifically for May. However the solid body construction (the original RS has hollow cavities in the body) and the pick-ups (DiMarzio) that were not an exact replica of the Burns TriSonic did not make May happy, so the production stopped after just 300\u00a0guitars.<\/em><\/p>\n

\"\"<\/a>Additionally, this October 1999 copy of Guitar The Magazine<\/a> from the UK states that,\u00a0…it was 1984 when Brian May at last got together with GUILD to produce the first offical replica. Only 316 ‘close counterparts’ – ie not particularly accurate replicas – were made. These BHM-1 models had the correct body outline but a solid mahogany construction<\/strong>, glued-in necks and ebony fingerboards. The hardware was very different, too: the black-faced Dimarzio HHM pickups seemed to sound the part but the larger scratchplate and custom tension Kahler tremolo system with locking nut were way off the mark. (emphasis mine)<\/em><\/p>\n

There’s no way for me to tell if this guitar is chambered short of someone volunteering to x-ray it for me. Rapping on the back with my knuckle reveals nothing. I can tell you that\u00a0my 1990s Guild Brian May BHM1 weighs 8lbs 2oz – a full pound heavier than this one, and that’s the one that people say is better because it’s chambered.<\/p>\n[dropshadowbox align=”center” effect=”raised” width=”90%” height=”” background_color=”#ffffff” border_width=”1″ border_color=”#dddddd” ]If you have access to an x-ray machine in Northwestern New Jersey that can support imaging a guitar please contact me. I’m happy to pay for the privilege and have multiple guitars that I would very much like to have imaged. [\/dropshadowbox]\n

Pickups<\/h2>\n

\"\"<\/a>The pickups in this guitar are Dimarzio DP206 Brian May pickups that were made for this guitar and sold separately by Dimarzio as well. They are quite different than the Burns Trisonics found in the original Red Special as I will show in gory detail. The obvious difference from the start is that these are Statocaster single-coil-sized pickups whereas the Burns Trisonics are wider and don’t fit into a Strat pick guard. These pickups can and do fit into a Strat and indeed there have been many Strats built by fans using these pickups to try and copp that Brian May tone without having to spring for a Red Special copy like this one. Today there are Burns Trisonics made in Strat-sized enclosures that people generally prefer.<\/p>\n

Although I did not measure the pickups\u00a0in my guitar\u00a0directly, examples that I’ve found online all measure in the 8.0-8.2k DCR range, an example of which is shown in this Worthpoint link<\/a>. I did buy a single additional example of a DP206 that I paid way too much money for just so that I could tear it apart and compare it to the Trisonics. Such is the depth of my madness. Before we get to that, though, let’s talk about the original Trisonics in Brian May’s Red Special guitar.<\/p>\n

\"\"<\/a>This picture is from the fascinating article<\/a> by Fryer Gutiars who had the amazing opportunity to restore Brian’s original Red Special. As someone who routinely opens up\u00a0and reports on rare guitars with care, I can only imagine how it must have felt to work on such a one-of-a-kind instrument that has so much history. I also can’t imagine how Brian must have felt when his hand-made prized possession was dismantled some 45 years after he and his father built it by hand.<\/p>\n

\"\"<\/a><\/p>\n

The patent (3,249,677<\/a>) for guitar pickups from Burns shows the design of the original Trisonic and the text for the patent states that there can be one or two magnets, though as seen in the picture of the original Red Special pickup and the modern Burns version, most of the examples that I’ve seen have two magnets. Additionally, these pickups are bobbin-less and the patent goes on to state that …it is not essential for the coils to be wound on bobbins and they can satisfactorily be constructed either by winding them of\u00a0enamel\u00a0copper wire and shaping them on a former and then coating them with a lacquer such as shellac.<\/i><\/p>\n

\"\"<\/a>Curious about the design of the Dimarzio BHM pickups, I emailed Dimarzio’s excellent support and asked them about the design. Here’s the email I sent:<\/p>\n

Can you tell me anything about how the Dimarzio Brian May DP206 pickups from the 1980s (for Guild)<\/em>\u00a0were constructed? Are they like Strat single coils or are they built like the original TriSonics<\/em>\u00a0with the wire wrapped around the magnet? (email – Jan 26, 2019)<\/em><\/p>\n

And their response:<\/p>\n

\"\"<\/a>Neither. They are closer to Strat singles, but with a single bar magnet in the center of the<\/em>\u00a0bobbin. (email – Jan 28, 2019).\u00a0<\/em><\/p>\n

I decided to procure a spare while I was waiting for Dimarzio’s reply so that I could dismantle it to see what’s inside. You know, for science. And yes, I got in a lot of trouble for taking things apart when I was a kid.<\/p>\n

\"\"<\/a>The pickup that I dismantled is exactly like Dimarzio support described, but I did discovered some\u00a0additional bits that surprised me. First, the entire thing pulled apart without any tools lending credence to the common complaint\u00a0that they tend to\u00a0get microphonic over time because of parts coming loose. However, it looks as if there is pretty clear evidence of the pickup having residue of something probably applied\u00a0to prevent that from happening. Since I got this pickup from eBay I can’t say for sure if its original, but whatever it was it had been in there long enough to age and deteriorate to the point that it was not serving its intended purpose.<\/p>\n

\"\"<\/a><\/p>\n

The magnet from this pickup is most definitely ceramic which can be determined\u00a0based on its dark color. In this pic I’ve placed the Dimarzio Brian May magnet between two humbucker magnets to show the color difference. The two humbucker magnets are Alnico II and Alnico V, both of which kind of look like steel, while the ceramic magnet in the middle is quite obviously black.<\/p>\n

One of the drawbacks of using ceramic magnets is that ceramic is brittle, and the magnet from the pickup I took apart actually had a chip broken off of one corner which was suspended in the dried out goo where the magnet was. Remember – all I did was push this magnet out with my fingers. There were no tools involved, so it’s not like I abused the pickup to get it apart.<\/p>\n

\"\"<\/a>I’ve read people complaining that these pickups can be very microphonic, so I got one of my favorite high-gain rigs fired up, plugged in my Guild Brian May ’80s guitar and cranked the volume. Sure enough, the neck pickup in my guitar screamed like a banshee even with the strings muted.<\/p>\n

Brian May solved the squealing\u00a0problem in the ’60s by potting his pickups, though he used\u00a0Araldite epoxy instead of the wax we would generally use today. He also only did this on the neck and bridge pickup, and\u00a0from what I’ve read he does not recall why he did not include the middle pickup in this process. You can read about this in Brian’s own words on the Burns website<\/a>.<\/p>\n

Electronics<\/h2>\n

\"\"<\/a>The electronics on the ’80s Guild BHM1 are pretty accurate in that the pickups are wired in series and controlled through a set of six slide switches as shown here. There is a master tone and a master volume, and just like on the original, the volume is the control towards the back of the guitar which is a bit different than every other guitar I’ve played. It does make it simpler to grab the volume while playing, though, so it’s definitely a design with merit, especially on this guitar with all its switches.<\/p>\n

\"\"<\/a>The wiring is also accurate with each pickup connected \u00a0to a switch that allows the polarity to be reversed for that pickup. Each of the polarity switches is then connected to an on\/off toggle. This design may not seem noteworthy today, but remember that this was designed and built by Brian and his father back around\u00a01964 and there was nothing else like it on the market at the time.<\/p>\n

While I’ve complained a bit about the pickups, a huge part of the magic in the original is this unique wiring scheme, and the Guild pretty much nails it. What I must confess to not liking about the guitar’s electronics is the messy wiring.<\/p>\n

\"\"<\/a>The wiring of the switches themselves aren’t too bad, but much like I’ve seen on other Guilds from the mid-80s, the wiring is a bit of a mess. The solder joints aren’t bad, but there is kind of just a jumble of pickup wires that I had to be careful not to get stuck on the pick guard when I put everything back.<\/p>\n

To be fair, this is not the kind of thing that really affects the sound or playability, but it’s always better to have clean wiring. Always. This is something that Guild got right on the 1990s Brian May guitar, so stay tuned for that review where you’ll be able to see for yourself. This is possibly\u00a0due to the fact that Guild was owned by Avnet in the ’80s and US Music in the ’90s, but that’s speculation on my part. It could just be that they hired a new wiring guy.<\/p>\n

\"\"<\/a><\/p>\n

Once of the things I have to say that really bugged me about the wiring was this big ugly ground knot. That’s not a real technical term, by the way, but just look at that and tell me it’s not a ground knot.<\/p>\n

It looks to me like someone twisted all the ground wires in the guitar together, heated it up and plopped some solder on it. Sure, that’s another thing that doesn’t really matter and the average guitarist would never see it, but this just doesn’t look like the kind of workmanship I’d expect to see in what was the second highest-priced guitar sold by Guild in 1985. Especially a guitar with Brian May’s name on it.<\/p>\n

With either of the outer two pickups selected with the middle pickup and both in-phase, the combination is\u00a0hum cancelling which tells me that the the middle pickup must be Reverse-Wound and Reverse Polarity (RWRP) which is something that Brian May and his dad also did so many decades before the general guitar population started doing it with single coil pickups.<\/p>\n

\"\"<\/a>The pickup switches look complicated, and they are compared to the traditional layouts, but once you play with the guitar for a little bit you come to realize that even though there are 27 permutations, only half of them are unique, and three or four of those are the real go-to settings. In the chart I put together I’ve put the unique settings in bold. Really, though, all the charts and spreadsheets in the world don’t compare to just sitting with the guitar and playing with it for a bit. In short order the switches become second nature.<\/p>\n

Brian May discusses how the pickup switches all work in this very cool YouTube video<\/a> from his Star\u00a0Licks recording\u00a0from the ’80s.\u00a0He even mentions Guild and this model guitar and then mentions how it would be great to have a copy because he’s been playing his beloved Red Special for 20 years. Remember, this video (as of this writing) is 34 years old and that guitar already looks pretty well worn-in so you can imagine how it looks now.<\/p>\n

Hardware<\/h2>\n

\"\"<\/a>When it comes to historical accuracy of this guitar as compared to the original Red Special, two things immediately jump out to me as wrong. The less egregious of the two are the tuners, so I’ll start there.<\/p>\n

The tuners on the ’80s Guild Brian May guitar are the standard tuners that came on pretty much all of the Guild electrics around this time and they’re good, tight, and tune reasonably well, probably since they’re made by Gotoh for Guild. They just don’t belong on this guitar. This looks like a sure, we’ll make a signature guitar so long as we can use parts off the shelf for it<\/em> kind of move to me, which brings me to my next big gripe, and it was a deal-breaker for a lot of people.<\/p>\n

\"\"<\/a>Brian May famously made his own vibrato tailpiece out of a hardened knife edge and motorcycle springs. He also hand-crafted a roller bridge of his own design. Think about that for a minute – he designed and built his own bridge and vibrato tailpiece! In 1963 with hand tools and the help of his dad. This guitar has neither of those things. This guitar has a Kahler.<\/p>\n

Now, as a hard-core Floyd Rose fanboy from the ’80s, I used to hate Kahlers, but as I’ve collected and played many Guilds from that era I’ve come to appreciate some of its design aspects so\u00a0I don’t outright hate them any more. Except on this guitar. Holy hell does it just ruin the look of this guitar.<\/p>\n

Remember what I said about using off-the-shelf parts on a signature guitar? Here we go again. I guess we should be glad it wasn’t a Floyd Rose because Guild has a history of totally getting those wrong<\/a>. Hey, the Kayler (a 2300 pro) is completely functional and performs as it should, but it looks like\u00a0a big old ’80s dad fanny pack\u00a0on a supermodel in an\u00a0evening gown.<\/p>\n

It looks like someone took the blower from the car in Mad Max and cut a hole in the hood of their classic Austin Martin to make it fit.<\/p>\n

\"\"<\/a>It looks like someone duct-taped a carrot to a thoroughbred’s\u00a0head so they could call it a unicorn.<\/p>\n

It looks like crap.<\/p>\n

OK… I’m done. Suffice to say, I think the Kahler was a bad move<\/p>\n

The pick guard is one-ply like the original which is something that the ’90s model got\u00a0wrong. The strap pegs are the same type used on Guild Nightbird guitars from the early 1990s which are these Gripper Strap Buttons<\/a>\u00a0that can be found on StewMac. They do hold the strap better than the old-fashioned pegs, but they’re a pain in the butt to get the strap on and off of, so I’d probably convert them to strap locks if I were to gig with this guitar.<\/p>\n

\"\"<\/a>The knobs are very cool, though different than the original which has hand-turned metal knobs that are, again, part of the look of that iconic guitar. The knobs on the Guild don’t appear to be off-the-shelf parts, although they could be, and I wonder if Brian May had a hand in their design because a couple of things are apparent to me after using the ’90s Guild which has all-metal knobs.<\/p>\n

First, these knobs are much grippier and easier to grab when sweaty. Second, the design looks very similar to the originals, though the skirts on these are\u00a0clear plastic that has a single marker line on them. I think these are not so horrible a change as the Kahler, which I may have mentioned that I didn’t like, but the bottom line is that this is a signature guitar and so it should look, play, and behave like the real thing. To be completely fair, the glut of signature guitars didn’t really take off until the late ’80s, so this guitar was something new.<\/p>\n

Sound<\/h2>\n

\"\"<\/a><\/p>\n

When I sat to record this guitar, I had just come from a week of playing only the 1990s Guild Brian May guitar due to my having used that for my Guild Brian May Treble Booster pedal article. For better or worse, that became my standard for how a Red Special clone should sound and behave.<\/p>\n

I’d read a lot of stuff online about how the 1990s Guild was much better than the 1980s version, but I try to go into these things with an open mind and so, without even thinking, I picked up the ’80s Guild and plugged in. Did it hold up to the ’90s Guild? No, not really.<\/p>\n

As\u00a0usual, for\u00a0these recordings I used my normal Axe-FX III setup through the QSC K12 speaker recorded direct into my Macbook Pro using Audacity. I recorded using\u00a0the\u00a0ODS100 Clean<\/em>\u00a0patch, and then I recorded using an included Bohemian Rhapsody patch but with the included cocked wah disabled because that altered almost every setting to sound the same (which actually works nicely with a humbucker guitar).<\/p>\n

\"\"<\/a>For each recording I cycle through all of the unique\u00a0permutations of the switches as shown in the nearby chart. Each of the recordings has 13 samples of the same repetitive nonsense with the outcome hopefully showing the different effect each switch position has. I figured a clean amp can show that well and a Queen-esq setting can show how most people are likely to use the guitar.<\/p>\n

This section is about sound, and playability is in the next section, but I can tell you that when it comes to tone, it’s not even close to the real thing and for that I mostly blame the pickups. The guitar just doesn’t sound like classic Queen. Sure it can sound nasally and thin because the pickups are wired like the real thing, but they’re not Burns Trisonics, they don’t behave like Burns Trisonics, and most importantly they just don’t sound right. If you listen to the recording and think that it’s not bad, that is almost 100% the Axe-FX’s doing.<\/p>\n[dropshadowbox align=”right” effect=”raised” width=”” height=”” background_color=”#ffffff” border_width=”1″ border_color=”#dddddd” ]\n

ODS100 Clean Chords<\/strong><\/p>\n\nhttps:\/\/www.gad.net\/Blog\/wp-content\/uploads\/3019\/11\/Guild-80s-BHM1-ODS100-AllSwitches.wav<\/a><\/audio>\n

BR Preset\u00a0Riff<\/strong><\/p>\nhttps:\/\/www.gad.net\/Blog\/wp-content\/uploads\/3019\/11\/Guild-80s-BHM1-Bohemian-AllSwitches.wav<\/a><\/audio>\n

[\/dropshadowbox]I have to imagine that the differences in the bridge and the tailpiece affect the tone as well, and there are a lot of people who will forever say that Kahlers suck tone, but there’s no easy way for me to compare the Kahler with the original design so when it comes to tone I’m going to have to say that yeah, there’s probably a difference, but I can’t tell you what that difference is.<\/p>\n

My first impression while playing this guitar after a week with the ’90s Guild is that this guitar is strident and harsh when two pickups are selected and put out of phase. With the ’90s Brian May Guild I was constantly inspired to learn more riffs or dial in an extra 1% of Brian’s original tone. With this guitar my first thoughts were, “what’s wrong?” followed by about an hour of experimentation which resulted in me blaming the pickups.\u00a0With two pickups on and in phase, the guitar often overdrove whatever amp I used and usually\u00a0unpleasantly at that.<\/p>\n[dropshadowbox align=”right” effect=”raised” width=”” height=”” background_color=”#ffffff” border_width=”1″ border_color=”#dddddd” ]\n

One Vision<\/strong><\/p>\nhttps:\/\/www.gad.net\/Blog\/wp-content\/uploads\/3019\/11\/Guild-80s-BHM1-Burg-OneVisionIntro.wav<\/a><\/audio>\n[\/dropshadowbox]Normally when I get the sounds I seemed to be getting I try lowering the pickups, but this guitar does not really allow for pickup adjustment, though the pickups could probably be raised with shims or spacers if you wanted to make the problem\u00a0worse.<\/p>\n

I will say that I did not hate this guitar, but it did frustrate me trying to nail Brian May tones, and I think I figured out that with my rig set for the ’90s Guild, the ’80s Guild didn’t work well. Now, with my rig set for a “regular” guitar, this ’80s Guild did much better, so I think with the right setup you can still get there.<\/p>\n

\"\"<\/a>For the One Vision intro, I dug around and found this pretty nice preset\u00a0on Axe-Change<\/a> by Burgs for the Axe-FX III. Using Scene 7 (pictured) and the guitar set to have the bridge and middle pickups on and in-phase, I was able to get a pretty good recreation of the One Vision intro tone. I find it kind of humorous looking at that crazy complicated preset knowing that Brian May has a relatively simple live rig, but then this preset worked a lot better than the ones I tried to build on my own, so who am I to judge?<\/p>\n

Also, you know what? I think that One Vision recording sounds pretty damn good (here’s the original<\/a> to compare it to) so suddenly with the right signal path this guitar’s got a lot more going for it than I thought. I still find some of the settings to be pretty harsh, but with the right rig I think this guitar can sing. I can tell you that I tried the same preset with a humbucker guitar and it sounded absolutely awful, so the guitar can’t be discounted in that recording.<\/p>\n

Playability<\/h2>\n

\"\"<\/a>This guitar\u00a0is a little weird to play sitting because of the shape. The lower bout is pretty large and the treble-side cutaway is pretty small so the guitar sits a bit more to the right than I’m used to and there are times where I felt\u00a0like it might fall off of my leg if I wasn’t careful.<\/p>\n

Standing is a different matter and the guitar hangs very well. Quick changing the sounds can be a little bit of a challenge since there are so many switches, but I’d imagine that’s something you’d either get used to or work to avoid having to do mid-song. The knobs are easy to manipulate and though there’s a line on the knobs skirts, those skirts are transparent and are over a black background so they’re not too easy to discern in the dark. Still, I tend to adjust knobs by feel and sound, anyway, so that’s not really a big deal.<\/p>\n

The fretboard is very wide at 1 7\/8″, so if you’re not used to that it can feel a bit odd, but as someone with large hands, I love all of the room the wide neck\u00a0affords me. The neck is kind of shallow for the width, and I personally found it a bit too thin for my tastes. Apparently the real Red Special’s neck is 1 1\/8 inches (29mm) deep at the nut which is deeper than any Historic Les Paul I’ve ever played by almost 1\/4 inch. That’s a BIG neck. I think somewhere between those two extremes would have been good.<\/p>\n

Conclusion<\/h2>\n

When this guitar came out there was nothing else like it available to the regular consumer. Sadly, it didn’t really measure up and has become mostly a collector’s piece. With the prices these things are getting on the used market, the average musician would be much better served buying a modern Brian May guitar from the man himself<\/a>. Sure, those are made in Korea and this is a US-made guitar, but this guitar can’t be warrantied and as a collector piece probably shouldn’t be played out much, anyway.<\/p>\n

\"\"<\/a><\/p>\n

Let’s say you’re someone like me who has more money than brains and you want the real deal US-made Guild. I’d still not recommend this one because the Guild Brian May guitar\u00a0from the 1990s is just that much better in almost every way. Watch for my review of that guitar. However – and this is a big one – I got this guitar for almost half what I paid for the ’90s version. That’s still a sizable pile\u00a0of shells, but we’re talking fractions of thousands, so it’s not a distinction to be taken lightly.<\/p>\n

If I were to gig with this guitar instead of worrying about it getting dinged, I’d probably opt for a set of Burns Mini Trisonic<\/a>\u00a0pickups to see if they could closer to that killer Brian May tone while also imparting just a bit more authenticity to the look of the guitar.<\/p>\n

\"\"<\/a><\/p>\n

Is this a bad guitar? No. In fact, it’s really quite a nice guitar. It’s just that it was sold as a Brian May signature guitar and to that end I feel that it falls short. I’ve harped on the Kahler and the pickups and a whole bunch of other stuff, but when it comes right down to it, can I make this guitar sound like Queen? Yes, especially today where I’ve got \u00a0a supercomputer of a guitar processor (the Axe-FX III) that can let me dial in almost anything I want. Sure, that’s easier to do with my ’90s Guild BHM1, but is this was the only Brian May guitar I had then I’d have no problem playing it on stage where the nit-picky collectors wouldn’t be watching. I’d just be afraid of knocking it around because it was so expensive, and by “expensive”, I mean half the price of the ’90s Guild Brian May guitar. Still, for a US-made Guild that’s impeccably built and hard to come by, the price may not be too bad. That is, if you can find one.<\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

Over the years a few companies have built copies of Brian May’s famous Red Special guitar, and while they are pretty easy to come by today, that was not the case in the ’80s. One of the first to make one was Guild who, in the mid-1980s, produced a small number of these BHM1 guitars. […]<\/p>\n","protected":false},"author":4,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[32,20,15],"tags":[],"class_list":["post-13489","post","type-post","status-publish","format-standard","hentry","category-guild","category-guitar","category-reviews"],"yoast_head":"\n1985 Guild Brian May BHM1 | GAD's Ramblings<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"1985 Guild Brian May BHM1 | GAD's Ramblings\" \/>\n<meta property=\"og:description\" content=\"Over the years a few companies have built copies of Brian May’s famous Red Special guitar, and while they are pretty easy to come by today, that was not the case in the ’80s. One of the first to make one was Guild who, in the mid-1980s, produced a small number of these BHM1 guitars. […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/\" \/>\n<meta property=\"og:site_name\" content=\"GAD's Ramblings\" \/>\n<meta property=\"article:published_time\" content=\"2019-03-20T02:00:57+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2023-07-29T05:52:46+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.gad.net\/Blog\/wp-content\/uploads\/3018\/09\/Guild-1985-BrianMay-BM01-Top-5-2.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1600\" \/>\n\t<meta property=\"og:image:height\" content=\"1067\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"GAD\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@GAD\" \/>\n<meta name=\"twitter:site\" content=\"@GAD\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"GAD\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"33 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/\"},\"author\":{\"name\":\"GAD\",\"@id\":\"https:\/\/www.gad.net\/Blog\/#\/schema\/person\/5c8af1fac08082910e148cab2d649f36\"},\"headline\":\"1985 Guild Brian May BHM1\",\"datePublished\":\"2019-03-20T02:00:57+00:00\",\"dateModified\":\"2023-07-29T05:52:46+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/\"},\"wordCount\":6722,\"commentCount\":28,\"publisher\":{\"@id\":\"https:\/\/www.gad.net\/Blog\/#\/schema\/person\/5c8af1fac08082910e148cab2d649f36\"},\"image\":{\"@id\":\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.gad.net\/Blog\/wp-content\/uploads\/3018\/09\/Guild-1985-BrianMay-BM01-Top-5-2-300x200.jpg\",\"articleSection\":[\"Guild\",\"Guitar\",\"Reviews\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/\",\"url\":\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/\",\"name\":\"1985 Guild Brian May BHM1 | GAD's Ramblings\",\"isPartOf\":{\"@id\":\"https:\/\/www.gad.net\/Blog\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.gad.net\/Blog\/wp-content\/uploads\/3018\/09\/Guild-1985-BrianMay-BM01-Top-5-2-300x200.jpg\",\"datePublished\":\"2019-03-20T02:00:57+00:00\",\"dateModified\":\"2023-07-29T05:52:46+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#primaryimage\",\"url\":\"https:\/\/www.gad.net\/Blog\/wp-content\/uploads\/3018\/09\/Guild-1985-BrianMay-BM01-Top-5-2.jpg\",\"contentUrl\":\"https:\/\/www.gad.net\/Blog\/wp-content\/uploads\/3018\/09\/Guild-1985-BrianMay-BM01-Top-5-2.jpg\",\"width\":1600,\"height\":1067},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.gad.net\/Blog\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"1985 Guild Brian May BHM1\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.gad.net\/Blog\/#website\",\"url\":\"https:\/\/www.gad.net\/Blog\/\",\"name\":\"GAD's Ramblings\",\"description\":\"The Art of Being Quirky\",\"publisher\":{\"@id\":\"https:\/\/www.gad.net\/Blog\/#\/schema\/person\/5c8af1fac08082910e148cab2d649f36\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.gad.net\/Blog\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":[\"Person\",\"Organization\"],\"@id\":\"https:\/\/www.gad.net\/Blog\/#\/schema\/person\/5c8af1fac08082910e148cab2d649f36\",\"name\":\"GAD\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.gad.net\/Blog\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/1937f868691364403823bf1ec4c63472b01b2f824e932e256fdb6d30157db11f?s=96&d=mm&r=pg\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/1937f868691364403823bf1ec4c63472b01b2f824e932e256fdb6d30157db11f?s=96&d=mm&r=pg\",\"caption\":\"GAD\"},\"logo\":{\"@id\":\"https:\/\/www.gad.net\/Blog\/#\/schema\/person\/image\/\"},\"sameAs\":[\"http:\/\/www.gad.net\",\"https:\/\/x.com\/GAD\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"1985 Guild Brian May BHM1 | GAD's Ramblings","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/","og_locale":"en_US","og_type":"article","og_title":"1985 Guild Brian May BHM1 | GAD's Ramblings","og_description":"Over the years a few companies have built copies of Brian May’s famous Red Special guitar, and while they are pretty easy to come by today, that was not the case in the ’80s. One of the first to make one was Guild who, in the mid-1980s, produced a small number of these BHM1 guitars. […]","og_url":"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/","og_site_name":"GAD's Ramblings","article_published_time":"2019-03-20T02:00:57+00:00","article_modified_time":"2023-07-29T05:52:46+00:00","og_image":[{"width":1600,"height":1067,"url":"https:\/\/www.gad.net\/Blog\/wp-content\/uploads\/3018\/09\/Guild-1985-BrianMay-BM01-Top-5-2.jpg","type":"image\/jpeg"}],"author":"GAD","twitter_card":"summary_large_image","twitter_creator":"@GAD","twitter_site":"@GAD","twitter_misc":{"Written by":"GAD","Est. reading time":"33 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#article","isPartOf":{"@id":"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/"},"author":{"name":"GAD","@id":"https:\/\/www.gad.net\/Blog\/#\/schema\/person\/5c8af1fac08082910e148cab2d649f36"},"headline":"1985 Guild Brian May BHM1","datePublished":"2019-03-20T02:00:57+00:00","dateModified":"2023-07-29T05:52:46+00:00","mainEntityOfPage":{"@id":"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/"},"wordCount":6722,"commentCount":28,"publisher":{"@id":"https:\/\/www.gad.net\/Blog\/#\/schema\/person\/5c8af1fac08082910e148cab2d649f36"},"image":{"@id":"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#primaryimage"},"thumbnailUrl":"https:\/\/www.gad.net\/Blog\/wp-content\/uploads\/3018\/09\/Guild-1985-BrianMay-BM01-Top-5-2-300x200.jpg","articleSection":["Guild","Guitar","Reviews"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/","url":"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/","name":"1985 Guild Brian May BHM1 | GAD's Ramblings","isPartOf":{"@id":"https:\/\/www.gad.net\/Blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#primaryimage"},"image":{"@id":"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#primaryimage"},"thumbnailUrl":"https:\/\/www.gad.net\/Blog\/wp-content\/uploads\/3018\/09\/Guild-1985-BrianMay-BM01-Top-5-2-300x200.jpg","datePublished":"2019-03-20T02:00:57+00:00","dateModified":"2023-07-29T05:52:46+00:00","breadcrumb":{"@id":"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#primaryimage","url":"https:\/\/www.gad.net\/Blog\/wp-content\/uploads\/3018\/09\/Guild-1985-BrianMay-BM01-Top-5-2.jpg","contentUrl":"https:\/\/www.gad.net\/Blog\/wp-content\/uploads\/3018\/09\/Guild-1985-BrianMay-BM01-Top-5-2.jpg","width":1600,"height":1067},{"@type":"BreadcrumbList","@id":"https:\/\/www.gad.net\/Blog\/2019\/03\/19\/1985-guild-brian-may-bhm1\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.gad.net\/Blog\/"},{"@type":"ListItem","position":2,"name":"1985 Guild Brian May BHM1"}]},{"@type":"WebSite","@id":"https:\/\/www.gad.net\/Blog\/#website","url":"https:\/\/www.gad.net\/Blog\/","name":"GAD's Ramblings","description":"The Art of Being Quirky","publisher":{"@id":"https:\/\/www.gad.net\/Blog\/#\/schema\/person\/5c8af1fac08082910e148cab2d649f36"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.gad.net\/Blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":["Person","Organization"],"@id":"https:\/\/www.gad.net\/Blog\/#\/schema\/person\/5c8af1fac08082910e148cab2d649f36","name":"GAD","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.gad.net\/Blog\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/1937f868691364403823bf1ec4c63472b01b2f824e932e256fdb6d30157db11f?s=96&d=mm&r=pg","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/1937f868691364403823bf1ec4c63472b01b2f824e932e256fdb6d30157db11f?s=96&d=mm&r=pg","caption":"GAD"},"logo":{"@id":"https:\/\/www.gad.net\/Blog\/#\/schema\/person\/image\/"},"sameAs":["http:\/\/www.gad.net","https:\/\/x.com\/GAD"]}]}},"_links":{"self":[{"href":"https:\/\/www.gad.net\/Blog\/wp-json\/wp\/v2\/posts\/13489","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.gad.net\/Blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.gad.net\/Blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.gad.net\/Blog\/wp-json\/wp\/v2\/users\/4"}],"replies":[{"embeddable":true,"href":"https:\/\/www.gad.net\/Blog\/wp-json\/wp\/v2\/comments?post=13489"}],"version-history":[{"count":76,"href":"https:\/\/www.gad.net\/Blog\/wp-json\/wp\/v2\/posts\/13489\/revisions"}],"predecessor-version":[{"id":22820,"href":"https:\/\/www.gad.net\/Blog\/wp-json\/wp\/v2\/posts\/13489\/revisions\/22820"}],"wp:attachment":[{"href":"https:\/\/www.gad.net\/Blog\/wp-json\/wp\/v2\/media?parent=13489"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.gad.net\/Blog\/wp-json\/wp\/v2\/categories?post=13489"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.gad.net\/Blog\/wp-json\/wp\/v2\/tags?post=13489"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}